– Nominal width of the cutting sheet – 3.000mm
– Cutting thickness – σ = 45 daN / mm2 – 13 mm
– σ = 70 daN / mm2 – 10 mm
– Minimum cutting thickness – 3 mm
– Number of double strokes per minute – 9-12 c.d / min
– Cutting angle (between knives) – 20 20 ‘
– Work cycle time approx. – 6 sec
– Sheet limiter adjustment range – 5-750 mm
– Cutting-line distance – 300 mm
– Drive motor power – 22 kW
– Maximum working pressure – 140 bar
– Oil tank capacity – 300 l
– Overall dimensions: – length – 3.800 mm
– Width – 2600 mm
– Height – 1825 mm
– Net mass – approx. 11.000 kg

Nominal opening for passage through plateaus – Φ500 mm
Working height / vise seating surface M1 – 3000 mm
Turning radius of rotation: – min. 2400 mm – Max 8600 mm
Processed pipe diameter: – min. Φ508 mm– Max. Φ1422mm
Pipe wall thickness – Max. 80 mm
Overall dimensions:
– length 53025 mm
– width 5500 mm
– height 6800 mm

Nominal force of pressing cylinder 1000 KN
Maximum stroke of the pressing cylinder 1050 mm
Maximum pressing pressure 204 bar
Maximum stroke cylinder arm 1050 mm
Maximum thrust cylinder stroke 1450 mm
Maximum core extraction force 7 tons
Installed power 5.4 kW
Oil tank capacity 320 liters
Pressing cylinder lowering speed 26 mm / s
Pressing cylinder lifting speed 20 mm / s
Pressing speed 12 -120 mm / min
Core extraction speed 6 – 53 mm / s
Overall dimensions: – length 1625 mm
– width 1400 mm
– height 4610 mm
Net mass 9000 Kg

• Nominal force ram 630 kN
• Max. ram 560 mm
• Max. table – ram 720 mm
• Table size 900 × 560 mm
• Ram dimensions Ø200 mm
• Ram speed:
– working 5-14 mm / s
– approach 357 mm / s
– retraction 340 mm / s
• Operating power 11 kW
• The volume of the oil tank is 500 l
• Overall dimensions:
– height 2750 mm
– length 2100 mm
– width 1200 mm
• Weight 5500 kg

• Nominal force of the ram 1000KN
• Strong nominal cushion 630 kN
• Maximum ram stroke 500 mm
• Maximum cushion stroke 250 mm
• Maximum distance table – ram 615 mm